Sprockets
Sprockets are used in machinery either to transmit rotary motion between two shafts where gears are unsuitable or to impart linear motion to a track, tape etc. Most often, the power is conveyed by a roller chain, known as the drive chain or transmission chain, passing over a sprocket gear, with the teeth of the gear meshing with the holes in the links of the chain. The gear is turned, and this pulls the chain putting mechanical force into the system. Sometimes the power is output by simply rotating the chain, which can be used to lift or drag objects.
In other situations, a second gear is placed and the power is recovered by attaching shafts or hubs to this gear.
Though drive chains are often simple oval loops, they can also go around corners by placing more than two gears along the chain; gears that do not put power into the system or transmit it out are generally known as idler-wheels. By varying the diameter of the input and output gears with respect to each other, the gear ratio can be altered.
Available Sizes
Pitch : 3/8", 1/2", 5/8", 3/4", 1", 1.1/4" (Higher pitch can be provided against order)
No of teeth : 8 teeth upto 100 teeth
No of strands : Single Row / Double Row / Triple Row
Material : Mild Steel
For any specific requirements or Bulk Inquiries feel free to write to us @ mmstores.cbe@gmail.com or call us @ +91 -7418678229
Roller Chains
Roller chain or bush roller chain is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire- and tube-drawing machines, printing presses, cars, motorcycles, and bicycles. It consists of a series of short cylindrical rollers held together by side links. It is driven by a toothed wheel called a sprocket. It is a simple, reliable, and efficient[1] means of power transmission.
The roller chain design reduces friction compared to simpler designs, resulting in higher efficiency and less wear. Roller chains are used in low- to mid-speed drives at around 600 to 800 feet per minute; however, at higher speeds, around 2,000 to 3,000 feet per minute, V-belts are normally used due to wear and noise issues.
Available Size
Chain Pitch : 3/8" , 1/2", 5/8", 3/4", 1", 1.1/4" , 1.1/2"
No of Strands : Single Row , Double Row, Triple Row
Manufacturing Standards : British Standard BS & American Standard ANSI
Brands : Rolon , Imported